Tapco MIX 50 Ultra-Compact Mixer

Tapco MIX 50 Ultra-Compact Mixer

• 1 Mono Mic/Line input
• 2 Stereo Line Inputs
• Frequency Response Mic Input to any Output (Trim at 0 dB): +0, –1 dB, 10 Hz to 150 kHz; –3 dB, 10 Hz to 200 kHz
• Distortion THD and SMPTE IMD, 20Hz to 20kHz Mic Input to Main Output: < 0.005% @ +4 dBu output
• Noise 20 Hz to 20 kHz BW (150Ω source impedance) Equivalent Input Noise (EIN): –129 dBu
• Noise Residual Output Noise, Channel and Main Mix levels off Main, Ctrl Room, Phones: –106 dBu
• Common Mode Rejection Ratio (CMRR) Mic In: 60 dB @ 1 kHz Gain @ maximum
• Crosstalk Adjacent Inputs or Input to Output: –90 dB @ 1 kHz
• Input Gain Control Range: 0 dB to +50 dB
• Equalization Mono Channel EQ (Mix.50 only) High: ±15 dB @ 12 kHz
• Equalization Mono Channel EQ (Mix.50 only) Low: ±15 dB @ 80 Hz
• Mixer Rated Output Main, Aux, Control Room: +4 dBu
• Mixer Rated Output Maximum Rated Output: +22 dBu
• Maximum Input Levels Mic Input: +12 dBu, Gain @ +10 dB
• Maximum Input Levels Line Input: +30 dBu, Gain @ +10 dB
• Maximum Input Levels Tape Input and Aux Returns: +22 dBu
• Input Impedance Mic Input: 2.6 kΩ, balanced
• Input Impedance Line Input: 20 kΩ, balanced
• Input Impedance Stereo Aux Returns: 20 kΩ, balanced
• Input Impedance CD/Tape In: 24 kΩ, unbalanced
• Output Impedance Main: 240 Ω, balanced; 120 Ω, unbalanced
• Output Impedance Ctrl Room, Aux Sends: 120 Ω
• Output Impedance Tape Output: 1 kΩ
• Output Impedance Phones Output: 25 Ω
• VU Meters Main Left and Right 4 segments: Clip (+18), +6, 0, –20; 0 LED = 0 dBu
• AC Power Requirements External Power Supply output: 18.5 VAC x 2 @ 150 mA; (3-pin AC power connection)
• External Power Supply AC input Europe: 240 VAC, 50 Hz
• Mix.50 Dimensions: Height 1.6 in/41 mm, Width: 5.2 in/133 mm, Depth: 8.0 in/203 mm, Weight: 1.6 lb/0.7 kg
• The Mix.50 does not feature the phantom power or active DI found on the other Tapco Mix series mixers